RawPace Privacy Policy

Last updated: November 11, 2026

RawPace is a training app for Wear OS watches, with an Android phone app to set it up. It is developed by Miguel Angel Manguero, based in Spain, who is the controller of the data covered by this policy. Contact: [email protected].

In short

What data the app uses, and why

Maps and place search

Where it is stored and how it moves

Health Connect

If you turn on “Write activities to Health Connect” in the phone app’s settings (it is off by default), RawPace writes there each activity that arrives from the watch: the exercise session (sport, start, end, pauses and laps and, if you followed a route, its name as the title; in Strength, each exercise and its breakdown in the notes), distance, heart rate with the time of each reading, elevation gained, speed, step cadence and the brand and model of the watch you recorded it with. The GPS route is written only if you grant that permission separately. Each kind of data needs its own permission, and you can withdraw it in Health Connect at any time.

RawPace only writes to Health Connect: it reads nothing that other apps store there, nor what it stored itself. What it writes stays on your phone, under Health Connect’s control; RawPace does not send it from there to any server, does not use it for advertising and does not sell it. If you delete an activity in RawPace, it is deleted from Health Connect too; and you can delete any data from Health Connect itself. On watches with Wear OS 6, heart rate from the sensor is requested with a system health permission (“Heart rate”): it is only used to read the watch’s sensor, not to read Health Connect data.

Strava and Runalyze

Only if you connect your account in Settings → Connections, RawPace uploads to that service each new activity that arrives on the phone, without you doing anything else, and, if you accept when connecting, your earlier ones as well. It goes straight from your phone to Strava or Runalyze, as a FIT file with the route, heart rate, cadence, altitude, laps and pauses; in Strength, also each set with its exercise, reps and weight, and the calories estimated by the watch. Runalyze also receives the activity name (that of the workout you followed, if you followed one), a note (“Recorded with RawPace”, with the exercise breakdown in Strength), the elevation gained and lost, whether the altitude comes from the barometer and, if you followed a route, its name. Strava gets the activity name if you followed an interval workout or in Strength, and, in Strength, the exercise breakdown as the description. RawPace only uploads: it reads nothing from your Strava or Runalyze account.

The access keys that Strava or Runalyze give you (or your Runalyze personal token, if you paste one) are stored encrypted on your phone. When you disconnect, they are deleted from the phone and the service is asked to revoke access. What you have uploaded is subject to Strava’s or Runalyze’s privacy policy, and who sees it is set by your account’s privacy there; deleting an activity in RawPace does not delete it from those services. Strava may monitor and collect usage data about RawPace’s use of the Strava API, under Strava’s own terms.

To connect your account and keep it connected, the app goes through a small RawPace service, tokens.rawpace.app, hosted on Cloudflare. Strava and Runalyze require, for those steps, a RawPace application key that must not be shipped inside the app, and this service adds it. It only passes on the one-time code or the access key the service gave your phone, and returns the new key to your phone; for Strava, also when you disconnect. It stores nothing and keeps no logs, removes your Strava profile data from the response, and never receives your activities. As with any Internet connection, it receives your IP address, and to prevent abuse it counts, for one minute, how many requests come from each one. Apart from that, RawPace receives and stores nothing from Strava or Runalyze.

Intervals.icu

As with Strava and Runalyze: only if you connect your Intervals.icu account in Settings → Connections, RawPace uploads to Intervals.icu each new activity that arrives on the phone, without you doing anything else, and, if you accept when connecting, your earlier ones as well. It goes straight from your phone to Intervals.icu, as a FIT file with the route, heart rate, cadence, altitude, laps and pauses (in Strength, also each set and the calories), along with the activity name (that of the workout you followed, if you followed one) and a note (“Recorded with RawPace”, with the exercise breakdown in Strength). RawPace only uploads: it reads nothing from your Intervals.icu account.

The access key that Intervals.icu gives you is stored encrypted on your phone. When you disconnect, it is deleted from the phone and Intervals.icu is asked to revoke access. What you have uploaded is subject to Intervals.icu’s privacy policy, and who sees it is set by your account’s privacy there; deleting an activity in RawPace does not delete it from Intervals.icu.

To connect your account, the app goes through the same RawPace service, tokens.rawpace.app, which adds the RawPace application key: it only passes on the one-time code and returns the access key to your phone. It stores nothing and keeps no logs, removes your Intervals.icu profile data from the response, and never receives your activities. As with any Internet connection, it receives your IP address, and to prevent abuse it counts, for one minute, how many requests come from each one. Apart from that, RawPace receives and stores nothing from Intervals.icu.

When it leaves your devices

Your activities, only when you decide: when you write them to Health Connect or upload them to Strava, Runalyze or Intervals.icu if you turn that on, when you export them as FIT or GPX and share them with another app or service, or when you send us a diagnostic report. From then on, that service’s privacy policy applies. Your settings also leave them in the backup described above, to your Google account or the folder you choose and, if you move to a new phone with Android’s transfer tool, to the new phone.

How it is protected

How long it is kept

How to delete it

All the steps, with what is deleted and what is kept, are in Delete your RawPace data.

If you email us

If you write to [email protected] (for example, with your feedback on the test), we use your address and your message only to reply and to fix what you tell us about. If you write from the phone app (Settings › Help and contact › Email us), the email opens in your email app with a few lines already filled in to help us: the version of the phone app and of the watch app, and the model and system version of your phone and your watch (if the watch is not connected, it says so, with the last model and system version known for it). You see them before sending and can delete them: nothing goes out until you send it. Email is handled by Proton Mail (Proton AG, Switzerland). We do not pass it on to anyone. We delete it within 15 days of your question being resolved or of you asking us to delete it (delete your data).

The Google Play test

To join the test, you ask to join the testers Google Group, rawpace-testers, with your Google account, and Google Play gives access to the test to the people in the group. The group is a Google service: what you enter when you ask to join and what is posted there is handled by Google, under its privacy policy. As the group’s owners, we see your Google account’s email address, the name and profile the group shows for you, and anything you write when you ask to join (for example, your watch and phone). We use them only to approve your request, give you access to the test and tell you about each version through the group. We don’t copy the list outside the group or give it to anyone. Other testers can’t see the member list. To stop, leave the group, or ask us to remove you (delete your data). Your feedback on the test is best sent by email to [email protected]: the group is only for our announcements.

If you send us a diagnostic report

If something goes wrong, you can prepare a diagnostic report from the phone app to help us find the problem. It is a file with:

If you tick “Remove the GPS track”, the FIT file and the raw data go without positions, coordinates and heading data are removed from the logs, and the names of your routes and map regions are left out too. Nothing is sent automatically: you choose which app to send it with and who to send it to; we suggest [email protected] (or [email protected] if the app is in Spanish). If you send it to us, we use it only to investigate that problem, and we delete it, with the email it came with, within 15 days of the problem being solved or of you asking us to.

“Detailed diagnostics” is off by default. If you turn it on in the phone app’s settings, next to “Send diagnostics”, the watch keeps more detail during each activity to look into a problem: heart rate, screen, GPS and, when you run, pace second by second. That detail stays on the watch, only leaves it if you send us a diagnostic report, and turns itself off after 7 days; you can turn it off sooner.

Children

RawPace is not intended for children under 16.

Your rights

Since we do not keep your training data on any server, we have no copy to give you or delete: it is on your devices (and, if you turn it on, in Health Connect, Strava, Runalyze or Intervals.icu) and you control it. For a diagnostic report or an email you sent us, you can ask us for a copy or to delete it (how to delete your data). For any question about your data, write to us. If you think it necessary, you can complain to the Spanish Data Protection Agency (aepd.es).

This website

rawpace.app is hosted on Cloudflare Pages. It uses no cookies and no analytics, and only stores in your browser whether you prefer the light or dark theme. Cloudflare processes technical connection data, such as your IP address, to serve and protect the site.

When you connect Strava, Runalyze or Intervals.icu, the service sends you back to a rawpace.app address (/strava, /runalyze/callback or /intervals/callback) with a one-time code. Usually Android opens RawPace directly and that page never loads; if it does, it only offers a button to go back to RawPace with that code: it does not store it or send it anywhere else, and it removes it from the address bar.

Changes

If this policy changes, we will publish it here with its date and mention it in the release notes.

← Back to RawPace