What's new
What changes in each version, newest first. Versions still in testing carry the "pending" tag until they're published.
0.3.4
November 11, 2026 · closed test
Intervals
- A new page: in the middle, the target figure with its marker (● ▲ ▼) in the color of how you’re doing: green, amber or red. At the top, an arc with the target and, at the bottom, another with your heart rate. On both, a white arrow shows where you are from the first second of the step; the zone you’re in is in full color and the others are dimmed. More in Intervals.
- The figure, in color or in white: with the Plain number style (the default), the figure is in white and the color only on the marker; with Color, the figure is in color too. You choose it on the phone, in Sports › (sport) › Alerts › Target › Target figure.
- Pace tolerance: ±5 s/km by default.
Map and navigation
- A strip at the bottom: the next turn (under 1 km away), the next waypoint or the finish; without a route, time and distance. Route alerts show there. You choose it in Sports › (sport) › Special screens › Map › Info on the map. More in The watch map.
- Moving the map with your finger: first, tap once in the middle of the map, near the arrow, and the Recenter button appears; then drag in any direction. To go back to your position, tap Recenter; if you don’t touch anything, it goes back by itself after 20 s. The crown is still the zoom.
- A double tap only locks the screen (a small padlock appears) and no longer zooms the map in; another double tap unlocks it.
- By default, the map now comes before the elevation profile. And the “© OpenStreetMap” notice shows once per workout, not every time you come back to the map.
- Back on route, a short-long vibration. Waypoints have a flag.
- On the bike, the map lines up sooner after a turn.
Climb and elevation profile
- Climb, a new special screen (with a route only): what’s left of the climb you’re on and how many are left. Add it in Sports › (sport) › Special screens › Add special screen. With “Show automatically when a climb starts”, the watch switches to it at the foot of a climb and goes back at the top. More in Climb.
- Elevation profile: the distance to the finish has no decimal from 100 km or 100 mi on (“FINISH 123 km”), and D+ from 1,000 m is shown in km (“D+ 2.4 km”; in imperial, from 1,000 ft, “D+ 7.9k ft”), so they fit without shrinking the text.
Pace and heart rate
- Pace in Trail running: current pace is now worked out the same way as in Running and follows pace changes sooner, for example when you switch from running to walking on a climb and back to running, and it’s steadier when you walk up a climb. On the phone, Sports › Trail running › GPS and pace no longer has a smoothing option, and Alerts now has “Target pace”, as in Running.
- Less precise GPS: on watches whose GPS gives a less precise speed (we’ve seen it on some Galaxy watches), current pace is steadier.
- The heart rate arc on the data pages is thicker, with the same arrow as the intervals page.
- The band’s battery, in its details on the watch (“HR band”).
Watch text
- Text size: on the phone, Settings › Watch › Text size (System, or 100 to 130%). Names, menus and alerts get bigger; the numbers don’t. More in Text size.
- Text a little bigger still on the watch home screen and menus.
New fields
- Step length: two new fields for your screens, “Step length” and “Lap step length”, and Avg step length in the summary and the activity details (on foot, with cadence). More in Data screens.
Strength
- Heart rate during sets and rests shows in its zone color, as on the data pages.
- Strava: for Strength and for intervals, the activity gets the workout’s name.
Phone
- One phone with several watches: they all get the settings, maps and workouts, and each one’s activities reach the phone. Settings › About shows one line per watch, and History shows which watch recorded each activity.
- Help and contact, in Settings: Email us opens an email with the versions and models already filled in. The help pages, the video guides, Send diagnostics and Detailed diagnostics (formerly in About) are there too.
- Reorder by dragging: screens, special screens and the steps of a workout are reordered by dragging their handle.
- The app in German.
Fixed
- Average and lap pace changed every second.
- Calories could go back to zero if the system closed the app.
- When the band dropped out, heart rate showed “--” for a moment before the wrist sensor took over.
- On some watches whose GPS already gives altitude above sea level (OnePlus), elevation was off by a few dozen meters.
- On watches with Wear OS 5.0 and 5.1, the home screen showed the heart rate permission as not granted (workouts did record heart rate).
Privacy
- Privacy policy, updated: in Health Connect, if you followed a route, the session takes its name as the title, and the watch’s brand goes too; Runalyze also gets the elevation gained and lost. And if you email us with the watch disconnected, the email says so, with the last model known for it.
When updating
- Phone first, then the watch; then open the phone app once, so it sends the new settings to the watch. Don’t uninstall anything: you’d lose your activities and your settings.
- This version doesn’t change the data stored by 0.3.3. If you’re coming from 0.3.2, it updates your stored data as 0.3.3 does: afterwards you can’t go back to 0.3.2.
0.3.3
October 31, 2026 · closed test
Strength
- A new sport, without GPS: follow on the watch a strength session built on your phone (Workouts › New workout › Strength), with sets by reps or by time, weight and rests. Or train without a session, with your screens: choose Strength on the watch (it’s at the end of the sports) and leave Intervals on “None”.
- The last 10 s of a rest and of a set by time: an amber countdown and two vibrations. When it ends, another alert. Strength sound is off by default; turn it on in Sports › Strength › Laps.
- When uploaded: it reaches Strava, Runalyze, Intervals.icu and Health Connect as strength training, with every set and the exercise breakdown. Calories show in the activity details on your phone.
- The breakdown, on your phone too: the activity details show every set with its exercise, reps and weight, and the same goes to Health Connect, the FIT file and uploads.
- What you did, in the description: when you upload a strength session to Strava, Runalyze or Intervals.icu, the activity’s description (on Runalyze, its notes) tells what you did: each exercise with its sets and reps (“Squats 3×12 · 40 kg”) and the rest. Without a session, the time of each lap you mark.
Intervals
- Clearer interval page: TO GO always in the same place, bottom left, and with its unit (“380 m”). On steps without a target, pace is the big number (speed on the bike).
- Pre-alert: the page no longer moves; TO GO and the step bar turn amber.
- The pre-alert beeps if the sport’s “Lap alert sound” is on, in every sport. If you already had it on, you’ll now hear the pre-alert too.
- Color: it follows the number you see and changes right away. The watch vibrates only when entering and leaving red.
- Default screens: if a sport is missing any of its default screens, a line under “Add screen” in Sports adds them after yours, leaving yours as they are.
- Session name: on Runalyze and Intervals.icu, an interval or strength activity is uploaded with its session’s name.
- At the end of each interval: the alert shows “3/5” (the interval you just finished and how many the session has), the target in the color of your average (green inside, amber close, red far off), and the interval’s time, average pace (speed on the bike) and average heart rate.
- Summary at the end, on the watch: an INTERVALS block with every interval and its target. Its header no longer splits on small watches with large text.
History and Sports
- Pick the sport from a menu next to the title: in History, the “All ⌄” button; in Sports, the one with the sport you’re looking at.
- Moving time: in the watch summary, after “Time”, and at the end of the activity details. It shows on activities with a GPS track recorded from this version on.
Chest strap
- Next to heart rate: the strap mark, on the home screen and during the activity. It takes the color of the heart rate number and blinks while the watch looks for the strap.
- After 2 min without data from the strap, the watch stops looking for it and goes on with its own heart rate. To try again, “Look for the strap” in Controls (another 2 min).
- No gaps when linking: until the strap sends its first reading (at the start or when it links again), the watch’s heart rate shows from the first second.
- Permission: if you have a saved strap, permission is asked when you open the app, not when you press START.
Map and navigation
- When running, with the “Direction of travel” orientation, the map turns much sooner after a corner, smoothly.
- Miles: the next turn shows “mi” after the number.
- Off route: in kilometers from 1000 m (“1.0 km”). When the alert doesn’t fit on one line, it takes two.
- Out-and-back routes: where a route uses the same path twice, the watch follows your direction and won’t send you down the wrong leg.
- Spurs and zigzags: where the route goes in and back out the same way within a few meters, or makes a short zigzag, there are no more alerts for turns that aren’t there. If the route then really turns back, that turn is announced.
Screen
- Larger text on the home screen and the watch’s lists.
- Clearer lock icon when the screen is locked.
- “Activity cut off”: the new name of the notice when an activity was cut off. Tap it to recover it.
- Lap alert: it lasts 4 s unless you’ve changed it (it was 7 s).
Battery
- The map is released from memory when the screen turns off.
- With the screen off, the activity notification no longer updates every minute.
- Diagnostics run in basic mode. If we ask you for more detail, turn it on in Settings › About › Detailed diagnostics.
OnePlus Watch
- The bottom button pauses and resumes, if its single press is free (the watch explains it the first time).
Export
- GPX with more precise coordinates.
Privacy
- Privacy policy, updated for Strength: which data from a strength session is stored (exercises, reps and weight) and where it goes when uploaded. To Health Connect, every set and rest, with the breakdown in the notes. To Strava, Runalyze and Intervals.icu, the file with every set.
- And how to join the test: through the Google testers group (rawpace-testers); email is for your feedback.
When updating
- Phone first, then the watch; then open the phone app once. This version updates your stored data: afterwards you can’t go back to 0.3.2.
0.3.2
October 24, 2026 · internal test; from the 25th, in the closed test
Intervals
- Creating them on the phone is simpler.
- “Manual” steps, which go on until you tap “Next step” on the watch.
- You can choose the field next to TO GO for each step.
- With the always-on screen, during intervals, it updates every second, even in ambient mode.
Navigation
- “ON ROUTE”: an alert when you reach the route.
- Turns: a second, full-screen “turn now” alert, just before you get there.
- Roundabouts: a drawing with the exit the route takes, and better alerts when the route follows the sidewalk.
- Off route: a full-screen alert, with an arrow back to the route and the distance to it.
- Map: names in the app’s language.
Pace and heart rate
- Improved current pace.
- HR zones: a new special screen you can add, with the time in each zone during the activity.
- HR zones in the activity summary on the watch, with the time in each zone.
Integrations
- Intervals.icu joins the existing integrations. Activities upload automatically, as with Strava, Runalyze and Health Connect.
Settings
- On the phone, reorganized by sport: Laps, Alerts, Screen, GPS and pace, Buttons and gestures.
- Lap vibration and sound, per sport.
- 12 or 24 h time, as on your system.
Miles
- An interval step written in meters stays in meters, on the watch too.
- Next turn and “off route” switch to miles from 1,000 ft.
0.3.1
October 20, 2026 · internal test
- Turns: a single alert per roundabout; if you start a few meters from a turn, or rejoin the route close to one, it’s announced instead of skipped.
- Lap summary: its length can be set (7 s by default), and so can the background: light, dark or automatic.
- Current pace: steadier.
- Map: turn your wrist on the map page and the last map shows instantly.
- Pause: clearer at rest, and “···” while the watch looks for your heart rate.
- Double pinch to pause (Pixel Watch): now experimental and off by default.
- Fixed: an activity could start on its own after a language or display change.
Versions before 0.3.1 were internal tests without published notes. When updating, the phone first, then the watch; then open the phone app once.
← Back to RawPace